8 | Alderon Industries™ - Leading Edge Control Products
VertiMAC™ Pump Switch - USER GUIDE
Mounting Pump Switch (continued)
STEP 3: MOUNTING TO PIPE
Attach the pipe clamp to pipe at the approximate mounting level
and tighten using the fastener nut. Make sure to keep all cables
and wires away from the float while mounting.
Note: Do not completely secure pipe clamp and VertiMAC™
pump switch to the pipe until the off level has been determined.
See step 4 final mounting location on page 9.
CAUTION:
The VertiMAC™ pump switch MUST be mounted in
the vertical position. Mounting the pump switch at an angle will
result in the switch not functioning properly. Perform a quick test
by lifting the float up and down to ensure the switch is working.
