Alderon Industries™ - Leading Edge Control Products | 7
VertiMAC™ Pump Switch - USER GUIDE
Mounting Pump Switch
STEP 1: RELEASE PIPE CLAMP
The pipe clamp comes secured into the fastener (1A) and must
be released (1B) using either a slotted screwdriver or 5/16” nut
driver on the fastener nut.
1A
1B
STEP 2: INSTALL PIPE CLAMP
Slide the pipe clamp through the loop on the pre-installed pipe
clamp bracket of the VertiMAC™ pump switch.
Note: Make sure the pipe clamp is positioned as shown in the
diagram when installing so excess portion of the clamp exits the
fastener away from the pump switch.
