Alderon Industries VersAlarm I/O, Руководство пользователя

Страница: 9 / 20

Alderon Industries™ - Leading Edge Control Products | 9
VersAlarm™ I/O - USER GUIDE
Testing the Alarm
Make sure the installation process is completed and there is
power to the product.
STEP 1: TEST ALARM
Press the test/silence pushbutton on the front of the enclosure
for a few seconds. The red LEDs should illuminate, flashing and
the buzzer should annunciate.
STEP 2: TEST SENSOR
The sensor should be connected to terminals 3 and 4. Activate
the sensor, the red LEDs should illuminate, flashing and the
buzzer should annunciate.
STEP 3: TEST ALARM SILENCE
Press the test/silence pushbutton on the front of the enclosure
while the sensor is activated. The red LEDs should stop flashing
and remain solid and the buzzer should silence. The silence
condition will reset when the sensor is deactivated.
STEP 4: TEST WEEKLY
To ensure the product is functioning properly, test once a week.
POWER SENSOR AUX
1 2 3 4 5 6