Alderon Industries VersAlarm I/O, Руководство пользователя

Страница: 8 / 20

8 | Alderon Industries™ - Leading Edge Control Products
VersAlarm™ I/O - USER GUIDE
Wiring (continued)
STEP 3: INSTALL BOTTOM COVER
Place the bottom of enclosure back on, lining up with the
grooves (3A). Then slide the bottom piece upward (3B) until it
meets the top piece and screw hole is lined up with the boss.
Replace the screw at the bottom of the enclosure.
STEP 2: INSTALLING WIRE INTO WAGO CONNECTOR
1) Lift tab(s) upward.
2) Insert wire(s) into slot.
3) Press tab(s) downward.
4) Make sure wire(s) are secured.
3A
3B
TO OPEN
WAGO
TO CLOSE
WAGO