Alcatel Speed Touch 591s, Техническое руководство пользователя

Страница: 74 / 184

6 — Configuring frame relay connections
6-8 Speed Touch 591s Technical Practices
90-8785-01 February 2001
Procedure 6-12 Configuring DE mapping
CONFIG — CONNECT — <endpoint>
↵
— INTERWORKING — SERVICE_IWF —
DE_MAPPING — DE=CLP* or DE=0 or DE=1
where endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from 16 to
1007, or <N;0/vci>, and vci is a VCI number from 32 to 157
Procedure 6-13 Configuring CLP mapping
CONFIG — CONNECT — <endpoint>
↵
— INTERWORKING — SERVICE_IWF —
CLP_MAPPING — CLP=DE* or CLP=0 or CLP=1
where endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from 16 to
1007, or <N;0/vci>, and vci is a VCI number from 32 to 157
Procedure 6-14 Configuring EFCI mapping
Select one of the two connection endpoints:
CONFIG — CONNECT — <endpoint>
↵
— INTERWORKING — SERVICE_IWF —
EFCI_MAPPING — EFCI=FECN* or EFCI=0
where endpoint is in the format <U;S1/Ddlci> or <U;Ddlci>, and dlci is a value from 16 to
1007, or <N;0/vci>, and vci is a VCI number from 32 to 157
6.5 Configuring frame forwarding connection options
The softkey structure for configuring frame forwarding connection options is shown
below.
The procedures for selecting endpoints, displaying connection information and
disconnecting an endpoint for a frame forwarding connection are the same as those
for a frame relay connection. Refer to section 6.1 for details. Traffic pacing is
enabled by default and cannot be disabled.
SK002120
CONNECT <endpoint>
↵
SHOW_GROUP DISCONNECT TO_ENDPOINT <endpoint>
↵
CONFIG