Alcatel OS6855-24, Руководство пользователя по оборудованию

Страница: 193 / 204

Regulatory Compliance and Safety Information Standards Compliance
OmniSwitch 6855 Hardware Users Guide September 2011 page A-5
Environmental Standards
•
ETS 300 019 Storage Class 1.1
•
ETS 300 019 Transportation Class 2.3
•
ETS 300 019 Stationary Use Class 3.1
Industrial
•
Operational Temperature: IEC 60870-2-2: -40 ºC to +75 ºC
•
Temperature Type Test (Cold): IEC 60068-2-1: -40 ºC, 16 Hrs.
•
Temperature Type Test (Hot): IEC 60068-2-2: +80 ºC, 16 Hrs.
•
Storage Temperature: IEC 60721-3-1: Class 1K5: -40 ºC to +85 ºC
•
Humidity: IEC-60068-2-30, 95% (non-condensing), 55 ºC. 6 cycles
•
Mechanical Shock: IEC 60255-21-2: 30g 11mS
•
Vibration: IEC 60255-21-1: 2g @ 10-150Hz
•
Safety: ISA 12.12.01 (UL 1604), CSA22.2/213, UL 508, EN50021
•
EMI/EMC: EN61131-2, EN 61000-6-4:2007, EN 61000-6-2:2005, EN 55024:1998, IEC 6100-4-3,
IEC 61000-4-5, IEC 61000-4-12, IEC 61000-4-16, IEC 61000-4-17, IEC 61000-4-29, IEC 60255-5,
IEC 61850-3, IEC 62236-4:2008, EN 50121-4:2006, & Additional IEEE 1613 (C37.90x)
Military (Navy, Army, Air Force)
•
Environmental Testing: MIL-STD-810F: Shock and Vibration
1
•
Environmental Testing: MIL-STD-810F, Methods 500/501/502/503/504/505/506/507/508/509/510/
512/514/515/516/520/521 Low Pressure, Low Temperature, High Temperature, Temperature Shock,
Humidity, Salt Fog, Sand and Dust, Immersion, Acoustic Noise
2
•
EMI/EMC: MIL-STD-461E: CE101, CE102, CS101, CS114, CS115, CS116, RE101, RE102,
RS101, RS103
2
1. The OmniSwitch 6855-P14 does not meet this military shock and vibration standard.
2. Contact Alcatel-Lucent for availability.
FCC Class A, Part 15
This equipment has been tested and found to comply with the limits for Class A digital device pursuant to
Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions in
this guide, may cause interference to radio communications.Operation of this equipment in a residential
area is likely to cause interference, in which case the user will be required to correct the interference at his
own expense.
The user is cautioned that changes and modifications made to the equipment without approval of the
manufacturer could void the user’s authority to operate this equipment.It is suggested that the user use
only shielded and grounded cables to ensure compliance with FCC Rules.