Alcatel OS6855-24, Руководство пользователя по оборудованию

Страница: 29 / 204

OmniSwitch 6855 Series Chassis and Hardware Components OmniSwitch 6855-U24
OmniSwitch 6855 Series Hardware Users Guide September 2011 page 2-7
Refer to the illustration below for more front panel information. For detailed LED descriptions, refer to
page 2-21 . For information on the chassis rear panel, refer to page 2-23 .
OmniSwitch 6855-U24 Front Panel
Combo RJ-45 10/100/1000
The
OS6855-U24
provides two combo
10/100/
1000BaseT
.
By default, when an SFP is installed in a combo port, it
takes over the port number of the corresponding RJ-45
Ethernet port. In other words, if an SFP is installed in
the slot labeled 24, Ethernet port 24 would no longer be
available and cannot be used for 10/100/1000 traffic.
This default setting is referred to as “preferred fiber.”
Refer to “Configuring Ethernet” in the
Network Con-
figuration Guide for detailed information, including
steps for configuring combo port settings
.
1000Mbps SFP
The OS6855-U24 provides 22 non-combo SFP
connectors (1–22) and 2 combo SFP connectors
(24-24) for supported SFP transceivers.
Status LEDs
For information on the
OS6855-U24
’s sta-
tus LEDs, refer to
page 2-21
.
USB Port
Console Port
The OS6855-U24 front panel
provides one RJ-45 port for
console connections. Console
connections are used by net-
work administrators for
switch management. This
female RJ-45 connector pro-
vides a DTE console connec-
tion.