Alcatel OS6855-24, Руководство пользователя по оборудованию

Страница: 71 / 204

OmniSwitch 6855 Series Chassis and Hardware Components Installing the PS-I185AC-P (SDR-240-55) Power Supply
OmniSwitch 6855 Series Hardware Users Guide September 2011 page 2-49
5
To secure the standard portion of the "Y-type" or straight AC power cord, begin by inserting the
BLACK (North America) or BROWN (International) wire into the Line (L) terminal located at the
bottom-front of the PoE power supply.
6
Next, insert the WHITE (North America) or BLUE (International) wire into the Neutral (N) terminal.
7
Insert the GREEN (North America) or GREEN/YELLOW stripe (International) ground wire into the
terminal marked with the protective ground symbol.
Output Power Terminal Locations (North America wire color shown)
8
Using a screwdriver torque each terminal to 7 inch-pounds.
9
Secure the power supply by referring to “PS-I185AC-P (SDR-240-55) Power Supply Mounting” on
page 4-14
Final Power Cord Connections
1
Once the power supply has been secured to the tray, insert the output power cord’s four pin connector
into the PoE power port located on the rear panel of the OS6855-P14 chassis.
2
Plug the AC power cord’s IEC 60320 C15 connector into the switch’s system power supply brick.
3
Plug the AC power cord’s NEMA 5-15 into an easily accessible AC power source.
Caution. The product uses a Pluggable Type A power cord; therefore, please make sure that the power
socket is located near the equipment and is easily accessible.
Bottom-Front of Power Supply
N
L