Software Supported
OmniSwitch 6800/6850/9000—Release 6.1.3.R01
page 15
Feature Descriptions
802.1Q
Alcatel-Lucent’s 802.1Q is an IEEE standard for sending frames through the network tagged with VLAN
identification. 802.1Q tagging is the IEEE version of VLANs. It is a method of segregating areas of a
network into distinct VLANs. By attaching a label, or tag, to a packet, it can be identified as being from a
specific area or identified as being destined for a specific area.
When a port is enabled to accept tagged traffic, by default both 802.1Q tagged and untagged traffic is
automatically accepted on the port. Configuring the port to accept only tagged traffic is also supported.
802.1Q 2005 (MSTP)
802.1Q 2005 (Q2005) is a new version of Multiple Spanning Tree Protocol (MSTP) that is a combination
of the 802.1D 2004 and 802.1S protocols. This implementation of Q2005 also includes improvements to
edge port configuration and provides administrative control to restrict port role assignment and the propa-
gation of topology change information through bridge ports.
The 6.1.3.R01 release provides support for this feature on the OmniSwitch 6800 Series, OmniSwitch 6850
Series, and OmniSwitch 9000 Series.
802.1W (RSTP) Default
The Rapid Spanning Tree Protocol (RSTP) is now the default Spanning Tree protocol for the OmniSwitch
6800/6850/9000 regardless of which mode (flat or 1x1) is active.
802.1x Device Classification (Access Guardian)
In addition to the authentication and VLAN classification of 802.1x clients (supplicants), this implementa-
tion of 802.1x secure port access extends this type of functionality to non-802.1x clients (non-suppli-
cants). To this end device classification policies are introduced to handle both supplicant and non-
supplicant access to 802.1x ports.
Supplicant policies use 802.1x authentication via a remote RADIUS server and provide alternative meth-
ods for classifying supplicants if the authentication process either fails or does not return a VLAN ID.
Non-supplicant policies use MAC authentication via a remote RADIUS server or can bypass authentica-
tion and only allow strict assignment to specific VLANs. MAC authentication verifies the source MAC
address of a non-supplicant device via a remote RADIUS server. Similar to 802.1x authentication, the
switch sends RADIUS frames to the server with the source MAC address embedded in the username and
password attributes.
Device Classification is supported on the OmniSwitch 6800 Series and OmniSwitch 6850 Series. The
6.1.3.R01 release provides support for this feature on the OmniSwitch 9000 Series.
Text File Configuration
all
base
User Definable Loopback Interface
all
base
VLANs
all
base
VRRP
all
base
Web-Based Management (WebView)
all
base
Feature
Platform
Software Package