Near Sensitive Electronics
Don’t use your phone near sensitive electronic equipment – particularly medical
devices such as pacemakers – as it could cause them to malfunction. It can also
interfere with the operation of fire detectors and other automatic-control
equipment.
For more information about how your phone affects pacemakers or other
electronic equipment, please contact the manufacturer or your local distributor.
Your phone may cause interference when used near TVs, radios or automated
office equipment.
While Flying
Your phone can cause interference with aircraft equipment. So it’s essential you
follow airline regulations. And if airline personnel ask you to switch off your
phone, or disable its wireless functions, please do as they say.
In Hospital
Your phone may interfere with the normal operation of medical equipment.
Follow all hospital regulations and turn it off when you’re asked to by posted
warnings or medical staff.
At a Petrol Station
Don’t use your phone at petrol stations. In fact, it’s always best to switch off
whenever you’re near fuels, chemicals or explosives.
Around Water
Keep your phone away from water (or any other liquid). It’s not a waterproof
model.
Making Repairs
Never take your phone apart. Please leave that to the professionals.
Unauthorized repairs could break the terms of your warranty.
Broken Antenna
Don’t use your phone if the antenna is damaged, as it could cause injury.
Around Children
Keep your mobile out of children’s reach. It should never be used as a toy and it
might not be good for their health.
Original Accessories
Only use the original accessories supplied with your phone or those approved by
the manufacturer. Using unapproved accessories may affect performance, make
the warranty void, break national regulations on the use of mobile phones, or
even cause injury.
Near Explosives
Turn off your phone in or near areas where explosive materials are used. Always
obey local laws and turn off your phone when requested.
Emergency Calls
To make an emergency call your phone must be turned on and in an area where
there’s network coverage. Dial the national emergency number and press ‘send’.
Explain exactly where you are and don’t hang up until help has arrived.
Working Temperature
The working temperature for the phone is between 0 Degree and 40 Degree
Celsius. Please don’t use the phone outside the range. Using the phone under
too high or too low temperature might cause
problems.
This product meets applicable national SAR limits of
2.0 W/kg. The specific maximum SAR values can be
found on this user guide.
When carrying the produc
t or using it while worn on
your body, either use an approved accessory such as a
holster or otherwise maintain a distance of 10 mm
from the body to ensure compliance with RF exposure
requirements. Note that the product may be transmitting even if you are not
making a phone call.
RADIO WAVES
Specific Absorption Rate (IEEE)
THIS Device MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.
Your device is a radio transmitter and receiver. It is designed and manufactured
not to exceed the emission limits for exposure to radio-frequency (RF) energy.
These limits are part of comprehensive guidelines and establish permitted levels
of RF energy for the general population. The guidelines are based on standards
that were developed by independent scientific organizations through periodic
and thorough evaluation of scientific studies. These guidelines include a
substantial safety margin designed to ensure the safety of all persons, regardless
of age and health.
The exposure standard for devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR.
The SAR limit set by public authorities such as the Federal Communications
Commission of the US Government (FCC), or by Industry Canada, is 1.6 W/kg
averaged over 1 gram of body tissue.
Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the maximum value.
This is because the device is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are
to a wireless base station antenna, the lower the power output of the device.
