Before a device model is available for sale to the public, compliance with national
regulations and standards must be shown.
Maximum SAR value for this model:
Maximum SAR value in the head:
0.284 W/Kg
Maximum SAR value in the body:
0.724 W/Kg
While there may be differences between the SAR levels of various devices and at
various positions, they all meet the government r
equirement for RF exposure.
For body-worn operation, the device meets FCC RF exposure guidelines provided
that it is used with a non-metallic accessory with the handset at least 10 mm
from the body. Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
Additional information on SAR can be found on the Cellular Telecommunications
& Internet Association (CTIA) Web site: http:// www.phonefacts.net.
The World Health Organization (WHO) considers that present scientific
information does not indicate the need for any special precautions for use of
devices. If individuals are concerned, they might choose to limit their own or
their children’s RF exposure by limiting the length of calls, or using “hands-free”
devices to keep devices away from the head and body. (fact sheet n°193).
Additional WHO information about electromagnetic fields and public health are
available on the following website: http://www.who.int/peh-emf.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
For the receiver devices associated with the operation of a licensed radio service
(e.g. FM broadcast), they bear the following statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
For other devices, they bear the following statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that
may cause undesired operation.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Information about the meaning of marking CE:
That means that the product answers to
essential requirements of the European Directive
93/68/EEC
applicable
in
the
conformity
assessment procedures.
Maintenance
Use a dry soft cloth to wipe general dirt.
Do not use a hard cloth, benzene or thinner to wipe the phone, otherwise, the
surface of the phone will be scratched or could even result in the fading of color.
Take Care of your Device
Your device is a product of superior design and craftsmanship and should be
handled with care: The following suggestions will help you protect your phone:
Always keep the small parts of the phone away from children.
Keep the device dry, Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will rust electronic circuits. If your device
does get wet, remove the battery, and allow the device to dry completely
Before replacing it
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in high or cold temperature. High temperatures can
shorten the life of electronic devices and damage batteries.
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device. Only use a soft, clean, dry cloth to clean the surface of the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
Use indoor chargers.
