Alcatel-Lucent 7950 XRS Series, Руководство по настройке

Страница: 127 / 502

Root Commands
7950 SR OS Basic System Configuration Guide Page 127
ingress — Displays scheduler-name statistics applied on the ingress SAP.
egress — Displays scheduler-name statistics applied on the egress SAP.
interval seconds — Configures the interval for each display in seconds.
Default
11 seconds
Values
11 — 60
repeat repeat — Configures how many times the command is repeated.
Default
10
Values
1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
customer
Syntax customer customer-id site customer-site-name [ scheduler scheduler-name ] [ ingress | egress ]
[ interval seconds ] [ repeat repeat ] [ absolute | rate ]
Context monitor>qos>scheduler-stats
Description
Use this command to monitor scheduler statistics per customer multi-service-site. The first screen displays
the current statistics related to the specified customer ID and customer site name. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display. When the keyword
rate is
specified, the "rate per second" for each statistic is displayed instead of the delta.
Monitor commands are similar to
show commands but only statistical information displays. These
commands display selected statistics per the configured number of times at the interval specified.
Parameters
customer-id — Specifies the ID number to be associated with the customer, expressed as an integer.
Values
1 — 2147483647
site customer-site-name — Specify the customer site which is an anchor point for ingress and egress virtual
scheduler hierarchy.
scheduler scheduler-name — Specify an existing scheduler-name . Scheduler names are configured in the
config>qos>scheduler-policy>tier level context.
Values
An existing scheduler-name is in the form of a string up to 32 characters long composed
of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces,
etc.), the entire string must be enclosed within double quotes.
ingress — Displays the customer’s multi-service-site ingress scheduler policy.
egress — Displays the customer’s multi-service-site egress scheduler policy.
interval seconds — Configures the interval for each display in seconds.
Default
11 seconds
Values
11 — 60