Alcatel-Lucent 7950 SR, Руководство по управлению системой

Страница: 78 / 462

RADIUS Configurations
Page 78 7950 SR OS System Management Guide
RADIUS Configurations
• Configuring RADIUS Authentication on page 78
• Configuring RADIUS Authorization on page 79
• Configuring RADIUS Accounting on page 80
• Configuring 802.1x RADIUS Policies on page 81
Configuring RADIUS Authentication
RADIUS is disabled by default and must be explicitly enabled. The mandatory commands to
enable RADIUS on the local router are
radius and
server server-index address ip-
address secret key
.
Also, the system IP address must be configured in order for the RADIUS client to work. See
Configuring a System Interface of the 7950 SR OS Router Configuration Guide.
The other commands are optional. The server command adds a RADIUS server and configures the
RADIUS server’s IP address, index, and key values. The index determines the sequence in which
the servers are queried for authentication requests.
On the local router, use the following CLI commands to configure RADIUS authentication:
CLI Syntax:
config>system>security
radius
port port
retry count
server server-index address ip-address secret key
timeout seconds
no shutdown
The following displays a RADIUS authentication configuration example:
A:ALA-1>config>system>security# info
----------------------------------------------
retry 5
timeout 5
server 1 address 10.10.10.103 secret "test1"
server 2 address 10.10.0.1 secret "test2"
server 3 address 10.10.0.2 secret "test3"
server 4 address 10.10.0.3 secret "test4"
...
----------------------------------------
A:ALA-1>config>system>security#