manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 202

Distributed CPU Protection Commands

Page 202

7950 SR OS System Management Guide

log-events

Syntax

[no] log-events [verbose]

Context

config>system>security>dist-cpu-protection>policy>local-monitoring-policer

Description

This command controls the creation of log events related to 

local-monitoring-policer

 status and 

activity.

Default

log-events: send the  DcpLocMonExcdOutOfDynRes events

Parameters

verbose — 

This parameter sends the same events as just “log-events” plus DcpLocMonExcd,  

DcpLocMonExcdAllDynAlloc, and DcpLocMonExcdAllDynFreed.   The optional “verbose” 
includes some events that are more likely used during debug/tuning/investigations

protocol

Syntax

[no] protocol name [create]

Context

config>system>security>dist-cpu-protection>policy

Description

This command creates the protocol for control in the policy.

Control packets that are both forwarded (which means they could be subject to normal QoS policy 
policing) and also copied for extraction are not subject to distributed cpu protection (including in the 
all-unspecified bucket).   This includes traffic snooping (for example, PIM in VPLS) as well as con-
trol traffic that is flooded in an R-VPLS instance and also extracted to the CPM such as ARP, ISIS 
and VRRP. Centralized per SAP/interface cpu-protection can be employed to rate limit or mark this 
traffic if desired.

Explanatory notes for some of the protocols:

• bfd-cpm: includes all bfd handled on the CPM including cpm-np type, single hop and multi-hop, 

and MPLS-TP CC and CV bfd

• dhcp: includes dhcp for IPv4 and IPv6

• eth-cfm: 802.1ag and includes Y.1731.   Eth-cfm packets on port and LAG based facility MEPs 

are not included (but packets on Tunnel MEPs are). 

• icmp: includes IPv4 and IPv6 ICMP except Neighbor Discovery which is classified as a separate 

protocol ‘ndis’

• isis: includes isis used for SPBM

• ldp: includes ldp and t-ldp

• mpls-ttl: MPLS packets that are extracted due to an expired mpls ttl field 

• ndis: IPv6 Neighbor Discovery

• ospf+: includes all OSPFv2 and OSPFv3 packets, and also includes any packets with an IPv4 

destination address in the 224.0.0.0/24 prefix range (e.g. RIP) except the following: IGMP, PIM, 
VRRP, LDP and any other protocols explicitly identified in the dist-cpu-protection list of sup-
ported protocols.

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды