manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 375

Event and Accounting Logs

7950 SR OS System Management Guide

Page 375

Log Filter Commands

filter

Syntax

[

no

]

 filter filter-id

Context

config>log

Description

This command creates a context for an event filter. An event filter specifies whether to forward or 
drop an event or trap based on the match criteria.

Filters are configured in the 

filter

 

filter-id

 context and then applied to a log in the 

log-id

 

log-id

 

context. Only events for the configured log source streams destined to the log ID where the filter is 
applied are filtered.

Any changes made to an existing filter, using any of the sub-commands, are immediately applied to 
the destinations where the filter is applied.

The 

no

 form of the command removes the filter association from log IDs which causes those logs to 

forward all events.

Default

No event filters are defined.

Parameters

filter-id — The filter ID uniquely identifies the filter.

Values

1 

—

 1000

default-action

Syntax

default-action 

{

drop 

|

 forward

}

no default-action

Context

config>log>filter 

filter-id

Description

The default action specifies the action that is applied to events when no action is specified in the event 
filter entries or when an event does not match the specified criteria.

When multiple 

default-action

 commands are entered, the last command overwrites the previous 

command.

The 

no

 form of the command reverts the default action to the default value (forward).

Default

default-action forward

 — The events which are not explicitly dropped by an event filter match are 

forwarded.

Parameters

drop — 

The events which are not explicitly forwarded by an event filter match are dropped.

forward — 

The events which are not explicitly dropped by an event filter match are forwarded.

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды