manualshive.com logo in svg

Alcatel-Lucent 7950 SR, Руководство по управлению системой

Поделиться
Скачать
Alcatel-Lucent 7950 SR Скачать руководство пользователя страница 390

Logging Destination Commands

Page 390

7950 SR OS System Management Guide

Logging Destination Commands

filter

Syntax

filter filter-id
no filter

Context

config>log>log-id 

log-id

Description

This command adds an event filter policy with the log destination.

The 

filter

 command is optional. If no event filter is configured, all events, alarms and traps generated 

by the source stream will be forwarded to the destination.

An event filter policy defines (limits) the events that are forwarded to the destination configured in 
the log-id. The event filter policy can also be used to select the alarms and traps to be forwarded to a 
destination 

snmp-trap-group

. 

The application of filters for debug messages is limited to application and subject only. 

Accounting records cannot be filtered using the 

filter

 command. 

Only one filter-id can be configured per log destination.

The 

no

 form of the command removes the specified event filter from the 

log-id

.

Default

no filter

 — No event filter policy is specified for a 

log-id.

Parameters

filter-id. 

The event filter policy ID is used to associate the filter with the 

log-id

 configuration. The 

event filter policy ID must already be defined in 

config>log>filter

 

filter-id

.

Values

1 

—

 1000

from

Syntax

from 

{[

main

]

 

[

security

]

 

[

change

]

 

[

debug-trace

]}

no from

Context

config>log>log-id 

log-id

Description

This command selects the source stream to be sent to a log destination.

One or more source streams must be specified. The source of the data stream must be identified using 
the 

from

 command before you can configure the destination using the 

to

 command. The 

from

 

command can identify multiple source streams in a single statement (for example: 

from main 

change debug-trace

).

Only one 

from

 command may be entered for a single 

log-id

. If multiple 

from

 commands are 

configured, then the last command entered overwrites the previous 

from

 command.

The 

no

 form of the command removes all previously configured source streams.

Default

No source stream is configured.

Содержание 7950 SR















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды