Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 644 / 674

Page 644 7750 SR OS Router Configuration Guide
Unlike other commands and parameters where the default state is not indicated in the configuration
file. The
shutdown and no shutdown states are always indicated in system generated configuration
files.
template-set
Syntax template-set { basic | mpls-ip | l2-ip }
Context config>cflowd>collector
Description This command specifies the set of templates sent to the collector when using cflowd Version 9 or
Version 10.
Default basic
Parameters basic — Basic flow data is sent.
mpls-ip — Extended flow data is sent that includes IP and MPLS flow information.
l2-ip — Extended flow data is sent that includes Layer 2 (ethernet) and IP flow information.This
template is only applicable for v10(IPFIX) collectors.
inactive-timeout
Syntax inactive-timeout seconds
no inactive-timeout
Context config>cflowd
Description This command specifies the amount of time, in seconds, that must elapse without a packet matching a
flow in order for the flow to be considered inactive.
The no form of this command resets the inactive timeout back to the default of 15 seconds.
Note : Existing flows will not inherit the new inactive-timeout value if this parameter is changed
while cflowd is active. The inactive-timeout value for a flow is set when the flow is first created in
the active cache table and does not change dynamically.
Default 15
Parameters seconds — Specifies the amount of time, in seconds, that must elapse without a packet matching a
flow in order for the flow to be considered inactive.
Values 10 — 600