Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 154 / 674

Router Interface Commands
Page 154 7750 SR OS Router Configuration Guide
2. The service is shut down ( shutdown )
3. The interval is specified 10 — 100000.
4. The service is re-enabled ( no shutdown )
To remove the type cpm-np option, re-issue the bfd command without specifying the type
parameter.
Default no bfd
Parameters
transmit-interval — Sets the transmit interval, in milliseconds, for the BFD session.
Values
10 — 100000
10 — 100000 (see Important Notes above)
Default
100
receive receive-interval — Sets the receive interval, in milliseconds, for the BFD session.
Values
10 — 100000
10 — 100000 (see Important Notes above)
Default
100
multiplier multiplier — Set the multiplier for the BFD session.
Values
3— 20
Default
3
echo-receive echo-interval — Sets the minimum echo receive interval, in milliseconds, for the
session.
Values
100 — 100000
Default
0
type cpm-np — Selects the CPM network processor as the local termination point for the BFD
session. See Important Notes, above.
cflowd
Syntax cflowd { acl | interface } [direction]
no cflowd
Context config>router>interface
Description
This command enables cflowd to collect traffic flow samples through a router for analysis.
cflowd is used for network planning and traffic engineering, capacity planning, security, application
and user profiling, performance monitoring, usage-based billing, and SLA measurement. When
cflowd is enabled at the interface level, all packets forwarded by the interface are subjected to
analysis according to the cflowd configuration.
If cflowd is enabled without either egress-only or both specified or with the ingress-only keyword
specified, then only ingress sampling will be enabled on the associated IP interface.