Router L2TP Commands
Page 130
7750 SR OS Router Configuration Guide
next-attempt
Syntax
next-attempt
{
same-preference-level
|
next-preference-level
}
no next-attempt
Context
configure>router>l2tp
configure>service>vprn>l2tp
Description
This command enables tunnel selection algorithm based on the tunnel preference level.
Parameters
same-preference-level —
In case that the tunnel-spec selection algorithm evaluates into a tunnel that
is currently unavailable (for example tunnel in a blacklist) then the next elected tunnel, if
available, will be chosen within the same preference-level as the last attempted tunnel. Only
when all tunnels within the same preference level are exhausted, the tunnel selection algorithm
will move to the next preference level.
In case that a new session setup request is received while all tunnels on the same preference level
are blacklisted, the L2TP session will try to be established on blacklisted tunnels before the
tunnel selection moves to the next preference level.
next-preference-level —
In case that the tunnel-spec selection algorithm evaluates into a tunnel that
is currently unavailable (for example tunnel in a blacklist) then the selection algorithm will try to
select the tunnel from the next preference level, even though the tunnels on the same preference
level might be available for selection.
Default
next-preference-level
replace-result-code
Syntax
replace-result-code
code
[code...(upto 3 max)]
no replace-result-code
Context
configure>router>l2tp
configure>service>vprn>l2tp
Description
This command will replace CDN Result-Code 4, 5 and 6 on LNS with the Result Code 2. This is
needed for interoperability with some implementation of LAC which only take action based on CDN
Result-Code 2, while ignore CDN Result-Code 4, 5 and 6.
Default
no replace-result-code
Parameters
code —
Specifies the L2TP Result codes that need to be replaced.
Values
cdn-tmp-no-facilities — CDN Result-Code 4 on LNS will be replaced with the
result code 2 before it is sent to LAC.
cdn-prem-no-facilities — CDN Result-Code 5 on LNS will be replaced with the
result code 2 before it is sent to LAC.
cdn-inv-dest — CDN Result-Code 6 on LNS will be replaced with the result code
2 before it is sent to LAC.
Содержание 7750 SR-OS
