Alcatel-Lucent 7750 SR-OS, Руководство по настройке

Страница: 484 / 674

Global Filter Commands
Page 484 7750 SR OS Router Configuration Guide
Parameters filter-id — The MAC filter policy ID number.
Values 1 — 65535
create — Keyword required when first creating the configuration context. Once the context is
created, one can navigate into the context without the create keyword.
filter-name — A string of up to 64 characters uniquely identifying this filter policy.
redirect-policy
Syntax [ no ] redirect-policy redirect-policy-name
Context config>filter
Description This command configures redirect policies.
The no form of the command removes the redirect policy from the filter configuration only if the
policy is not referenced in an IP filter and the IP filter is not in use (applied to a service or network
interface).
Default
none
Parameters
redirect-policy-name — Specifies the redirect policy name. Allowed values are any string up to 32
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes. There is
no limit to the number of redirect policies that can be configured.
log
Syntax log log-id [ create ]
no log
Context config>filter
Description
This command enables the context to create a filter log policy.
The no form of the command deletes the filter log ID. The log cannot be deleted if there are filter
entries configured to write to the log. All filter entry logging associations need to be removed before
the log can be deleted.
Special Cases Filter log 101 — Filter log 101 is the default log and is automatically created by the system. Filter
log 101 is always a memory filter log and cannot be changed to a Syslog filter log. The log size
defaults to 1000 entries. The number of entries and wrap-around behavior can be edited.
Default log 101
Parameters log-id — The filter log ID destination expressed as a decimal integer.
Values 101 — 199