75
Preprogrammed Systems
Your scanner is preprogrammed with frequencies used at
races within the
Formula 1
.
By default, one of the racing systems are unlocked, and
your scanner begins to scan them when you turn it on. To
speed up scanning, you can lock out systems that are
beyond your reception area (typically no more than a few
kilometers using the supplied stub antenna).
Follow these steps to lock out systems:.
1. Press and hold
.
2. While continuing to hold
, rotate the scroll
control to select a system you want to lock out.
3. While continuing to hold
, press
L/O
to lock out
the system.
4. Repeat Steps 2, 3, and 4 to lock out additional
systems.
The preprogrammed systems provide a starting point; you
will want to find out more information about your local radio
systems so you can customize the programming to better
suit your listening preferences.
Notes:
•
To free up memory, you can delete systems that
you will not be monitoring.
•
Data used for the preprogrammed information was
supplied courtesy of
http://www.racescanner.eu
,
the Internet’s premier scanning resource.
European 2 years warranty
The distributor, dealer or retail shop warrants to the original
retail purchaser of this product that should this product or
any part of it, under normal use and conditions, be proven
defective in material or workmanship within 2 years from the
date of original purchase, such defect(s) will be repaired or
replaced with new or reconditioned product (at the
company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this
warranty, the product is to be delivered with proof of
warranty coverage (e.g. dated bill of sale), specification of
defect(s), to the distributor, dealer or his authorized repair
center.
The Company disclaims liability for communications range
of this product.
The warranty does not apply to any product or part there of
which, in the opinion of the company, has suffered or been
damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal or
defacement of the factory serial number/bar code label(s).
