28
•
Press
Hold
to set the selection.
Holding on a Car
Follow these steps to hold on a car within the
currently-selected racing system.
•
Press
0
in Scan mode, rotate the scroll control
to select the race, then press
E
.
•
Press
CAR
, enter the driver’s number, then
press
CAR
.
•
Or press
CAR
twice, rotate the scroll control to
select the driver, then press
CAR
. You can
select the car’s first unlocked frequency.
Selecting Interference Eliminator Codes
Many drivers use special codes in their radios to prevent
interference from other nearby radio systems. These codes
are commonly referred to as
CTCSS,
DCS
, or
subaudible
tones. You can use these same codes to prevent
interference from other systems.
•
Press
0
in Scan mode, rotate the scroll control
to select the race, then press
E
.
•
Press
CAR
, enter the driver’s number, press
E
or
CAR
, press
E
, rotate the scroll control to
select the driver, then press
E
.
•
Rotate the scroll control to select the driver’s
frequency, then press
E
.
•
Press
E
to enter the channel setting menu.
•
Rotate the scroll control to select SET
CTCSS/DCS, then press
E
.
•
Rotate the scroll control to select CTCSS or
DCS, then press
E
.
•
Rotate the scroll control to select the correct
CTCSS/ DCS value, then press
E
.
•
Press
Hold
to set the selection
Selecting Systems to Scan
To select systems to scan, press
Scan
then press the
number button corresponding to the quick key assigned to
the system or systems. To stop scanning the system(s),
press
Scan
again.
The
SYS
indicators on the display show the systems that
are currently selected.
To select or lock out a system that is not assigned to a key,
press and hold
while you rotate the scroll control until
the desired system is selected. Then, continue to hold
and press
L/O
to either lock out or unlock the system.
