43
This setting determines whether the scanner will scan this
car when it is enabled. Select your setting, then press
E
.
LOCKOUT
- the car is not scanned.
UNLOCKED
- the car is scanned.
Note:
The default setting is Unlocked.
Programming Conventional Systems
PROGRAM SYSTEM
E
NEW SYSTEM
E
CONVENTIONAL
E
CONFIRM?
E
T
he scanner creates an empty conventional system, with
a default name of
SYSTEM NNN C
.
NNN
increments as you add new systems.
C
indicates that
this is a conventional system.
Refer to the appropriate section to set system-wide options:
• See “Editing the System Name”
• See “Editing the System Quick Key (Conventional
Systems Only)”
• See “Setting Group Lockout”
• See “Setting the System Hold Time”
• See “Setting the Channel Delay Time”
• See “Setting Data Skip”
• See “Deleting Systems”
• See “Copying Systems”
• See “Entering/Editing Conventional Channel Groups”
Entering/Editing Conventional Channel Groups
To enter channels in a conventional system, first set up a
channel group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Setting Up a Channel Group
EDIT GROUP
E
NEW GROUP
E
The scanner creates a group with a default name of
GROUP NN. NN
increments by one for each new group you
create within a system.
Refer to the appropriate chapters to set group-wide options:
