Alberici TimeboxB ACS, Руководство пользователя

Страница: 6 / 22

A
5. Size
6. Installation
6.1
Cautions and dangers when installing
The unit must be installed by qualified technicians, skilled in mechanical and electrical operations.
Keep power supply disconnected during installation and during any further servicing.
Do not modify the circuits in the unit. Any change could impair the correct functioning.
The power line must comply with the Norm CEI 64-8/7. The section of the Ground lead must not be
smaller than the one prescribed by the CEI 64-8/4 Norm.
It is recommended that the line is under the protection of a 10A differential
switch, so as to make it easy to take power off when servicing.
6.2
Mounting
It is recommended to install it away from direct weather
agents such as rain/hail and sunlight.
Praticare 6 fori sulla parete o su un sostegno in metallo o legno
in corrispondenza dei fori predisposti sulla facciata sinistra della
TimeBox B.
A seconda del tipo di parete, inserire tasselli a espansione nei
fori praticati.
Aprire la Timebox, e fissare la sua facciata sinistra alla parete
mediante viti e rondelle nei fori corrispondenti ai fori tassellati.
76 21 21
6
52
54
66
Drill 6 holes on the wall or on a solid metal or wooden
support in correspondence with the holes provided on the
left side of the TimeBox B.
Depending on the type of wall, insert expansion anchors
into the drilled holes. Open the Timebox, and fasten its left
side to the wall by means of screws and washers in the
holes corresponding to the anchors.