Alberici TimeboxB ACS, Руководство пользователя

Страница: 14 / 22

7.3.2.3.1a Cashless setup
When first powering the unit on, the RFID ACS Reader flashes red, to show that it must be initialized.
- Initialize the ACS Reader
Edit a 6-digit PIN code, write it down and keep it in a safe place.
(*) The code must consist of 6 alphanumeric characters: press the OK button, the cursor sets to the
first digit: with UP or DOWN, choose the letter or digit to be entered, and confirm with the OK button.
The cursor will move to the next digit. When confirming digit n. 6, the request to confirm the entered
code appears. By selecting the "<" symbol and pressing OK, the last character entered gets deleted.
If RFID keys must be used that have already been initialized on another Alberici cashless reader,
take care to enter the same 6-digit PIN of the device in which they were initialized.
(**) If the same alphanumeric sequence entered before is wrongly re-written, the message appears:
and after 3 "the request to enter the correct code is presented again.
To protect the safety of the Device owner, it is no longer possible to change
the 6-digit code after it has been confirmed.
- Initialize the Master and Service Keys after having initialized the RFID ACS Reader
Following to the initialization of the ACS Cashless reader, the Master key (Owner - generally the black one) and the Service key
(Operator - generally yellow) can be initialized as well.
NOTICE: initialization of the keys can be postponed. In this case, see next page flow chart.
Insert the Master key and press the OK button: the display will prompt to enter the PIN code. After entering the last character, the
display will require confirmation of the same code. Insert the code again: the initialization
of the Master key will be started. When complete, the confirmation message gets displayed:
If a second Master key or the Service key must be created, repeat the process described.
Or else, choose the Service Key option in the menu to initialize the related key (Operator - generally white). To exit, remove the key
and wait for the device to return to tits stand-by condition.
- Initialize the User Keys
To initialize the User keys, exit the menu, insert the Master key or the Service key (already initialized on the same Timebox) in the
ACS key reader. The "Service Menu" will open: navigate by the "+" button in the menu shown, until finding the option INITIALIZE
KEYS: then press OK. Remove now the Master / Service Key, insert one User Key, and follow the instructions appearing on display:
Remove the key and insert a new one, and so on until you have initialized all the keys that can be used on this player. To exit,
remove the last key and wait for the device to return to the stand-by condition.
- Load credit on User Keys
Once User Keys have been initialized, they can be loaded with credit in three ways:
1) In case of self-service top-up:
- introduce the coins into the coin mechanism of the Timebox;
- enter the User Key
- press the lit up pushbutton: the amount introduced will be loaded on the key, and the display will show the total credit available.
2) Using the ACR user key programmer (K-P4N-000007), from
connect to a PC and use the ccTalk-mifare credit loading software
supplied with the ACR programmer.
The programmer and the relative software allow to cancel the configuration
of keys that have been programmed incorrectly.
3) By means of the KEY_LOADER ONE ACS (TB-L6A2) credit-uploading device:
Key
initialized!
Do not remove
the Key..
Key
initialized!
Insert User Key Please wait … Remove the Key
Insert
Key..
Enter PIN
_ _ _ _ _ _
Antenna has been
initialized!
Wrong
confirmation!
Initialize Cashless
antenna
Enter
PIN code
Confirm
PIN code
Write down
PIN code