Alberici TimeboxB ACS, Руководство пользователя

Страница: 10 / 22

A
A
A
A
A
Access to
Service Menu…
ACCOUNTS
A
7. Operation
7.1 Getting started
Switch the machine on: the display will lit on and will show the following message:
The machine is ready to operate by the following default preset values:
The Timebox B is able to simultaneously control two independent pay-for-time service lines, having different price and time
length. When introducing one coin or the RFID key, the corresponding credit will be displayed. If such amount is enough to
activate at least one of the two service lines, this one (or both of them) shall be proposed, and the relevant pushbutton light
will change from blue to green colour.
When pressing the button for service line A (or service line B), the display will show briefly paid amount and total time, then
the relevant relay will switch on, and remain on, for the set time. The display will show the progress of the count- down, and
the pushbutton will be blinking until end of service time.
If it has been introduced a larger amount than the price for the service, the proportionally larger activation time shall be
displayed and activated.
When the device gets switched on for the first time, the RFID key ACS reader flashes red, to signal that it must be
initialized. (see section 7.3.2.3.1b). The Timebox can be used also if the ACS has not been initialized.
7.2 Access through Master/Service Key
Insert the service key (Master or Service) in the RFID reader to view the audits and to initialize User keys (or else access
the menu using the on-board pushbuttons).
The Accounts menu appears and the pushbutton lits up green:
Hold down for 4” the pushbutton to
get access to the Accounts sub-menu.
Briefly hold down the pushbutton to show:
Hold down the for at least 4” to get
access to the sub-menu (see sect. 7.3.2.3.1b).
Press again the pushbutton to return to:
Remove the Master/Service Key to exit the Service menu. The standby message appears:
Accounts : press the pushbutton for at least “2 to enter to the audit details :
Press briefly and repeatedly the pushbutton to show:
If no Master/Service key is at hand, the records can be cancelled also by entering the menu by the on-board buttons.
Totals IN
xxx,xx €
A
Totals OUT
xxx,xx €
A
Reset
Partial records
price of service = 0,50 €
pulse length = 30 sec
Line 2: price of service = 0,50 €
pulse length = 30 sec
Line 1
:
System
in service
Totals IN
xxx,xx €
System in
service
INITIALIZE
CASHLESS
ACCOUNTS