Alberici Hira 2 Maxi, Руководство оператора

Страница: 15 / 40

7.3.6 S
ETUP THE
M
ACHINE
The PERIPHERAL UNITS function allows to set which banknote and coin denominations must be accepted; if POS
device is included, its operation can be enabled or disabled by this function. If the telemetry module is part of the
machine, this sub-menu allows to configure the GSM-GPS fuction (see section
7.3.6.1D) .
The DISPENSE MODE function allows to set the way the machine reacts to the introduction of money (i.e. change
money immediately and automatically, or wait for the User to confirm after dropping the money in); it also allows to set the
coin denominations (and possibly the note denomiations) that can be delivered by the dispensers.
By the PAY-OUT TABLE function, when enabled, the Operator can configure different combinations of dispensed
denominations relating to the amount introduced by the User; different operating options can be preset, according to
whether the DISPENSE MODE has been set for AUTOMATIC or for MANUAL operation.
7.3.6.1 Set up Peripheral Units
This section allows to set which banknote and coin denominations must be accepted; if POS device is included, its
operation can be enabled or disabled by this function.
7.3.6.1.A E
NABLE
N
OTES
(
NOTE DENOMINATIONS TO BE ACCEPTED
):
All the programmed note values (5-to- 100 Euro) are enabled (‘v’ = enabled) by default. To modify such condition, or to
change later modifications, p ress OK to get to the first denomination box (ex. 5 €), then press “ + ” or “ - ” to reverse its
status. Press OK to confirm (the sign ‘v’ will turn to ‘x’, and viceversa) and to shift to the next option (ex. 10 €).
Press OK to confirm and return to the u pper level. Then press “ + ” to shift to the following line ( E
NABLE
C
OINS
).
SETUP
‘v’ = enabled
‘x’ = disabled