Alberici Hira 2 Maxi, Руководство оператора

Страница: 9 / 40

6. Operation
Three buttons are available: “SELECT - ”, “ LANGUAGE/ ”, and “CONFIRM” allow the User to make his
choice when the unit is set to operate in MANUAL MODE. These buttons are lit up in blue colour when the unit is in
stand-by. The
“ LANGUAGE/ ” button allows the user to choose the language through which he wants to
interact: English, French, German, Italian and Dutch are available.
6.1 Manual 2P mode
6.1.1 CASH:
When a note or coin is inserted (or when the smaller value available in the hoppers is reached), the
“SELECT” and “CONFIRM” buttons will lit up in green colour. At the same time, the display will show t he first one
among the various pre-set change combinations proposed, out of the 1-to-5 pre-programmed by the Operator (see
section 7.3.6.3 B
PAY-OUT TABLE IN MANUAL MODE
). Press any “SELECT” button to get to the next page and check
the second combination, then press the button again and so on, to find among all the available combinations the one
that best suits your wish. Once found it, press the “CONFIRM” button to collect the changed amount or the
purchased tokens.
At the end of the payout cycle, the display will show both the inserted amount and the total amount paid out.
6.1.2 POS: POS operation is allowed only if the machine delivers Tokens only . Use of the machine to cash
from credit cards or debit cards is ILLEGAL, since the machine is not a licensed ATM.
The instruction on the machine display alternatively prompts the User to press the SEL (SELECT-) button if purchase
by credit/debit card is desired:
-
Lean your RFID ChipCard against the POS Terminal: you will be invited to select your product (how much money
you will pay to purchase the tokens):
LEAN CARD AGAINST TERMINAL
press th e “SELECT“
button, the display will
show:
SELECT AMOUNT OF PURCHASE
5,00€
CONFIRM TO COLLECT