Alberici Hira 2 Maxi, Руководство оператора

Страница: 22 / 40

EROGATORE BANCONOTE Nr. 2
HP1 HP2
50 0
40 20
35 30
30 40
25 50
When confirming the exit arrow icon (>) after Level 7, the system will save all the programmed settings.
-
If the Operator wants to make available only a limited number of combinations options (ex. only 3 options), he
will leave 0 in all the boxes of the rows 4 and 5.
-
If the Operator wants to set only a limited number of levels (ex. 4 levels out of the 7 programmable), he will
leave 0 in all the boxes of levels 5, 6, and 7.
PAY ATTENTION: if all the boxes in each level are set to 0 (zero), the machine will react as if the Pay-out Table is
disabled; so it will prompt the User to choose from which hopper (i.e. denomination) he wants to collect his change.
7.3.6.3 Exit
To return to the upper menu level, highlight the EXIT line by the “ + ” button- key, and confirm by “OK”.
7.3.7 E
MPTY
O
UT THE
D
ISPENSERS
Use this function to make the selected dispenser(s) pay out all the contained coins / tokens, or, if device is a note
recycler, to make it move the contained banknotes in the note validator stacker. During emptying, and once emptied the
first dispenser, the relevant emptied amount shall be displayed. Press OK to go on with the second dispenser.
Press OK to get
access to the emptying options; press “ + ” to shift down to the next options; press OK to start emptying
the highlighted device:
If the emptying menu remains still for over 1 minute (e.g. without receiving any command, as for instance when the
service staff might forget to exit the menu after service operations), the system will return to stand-by, to prevent the risk
that strangers may have free access to the controls.
7.3.8 R
ESTORE
D
EFAULT
C
ONFIGURATION
.
▒ ▒ ▒ ▒
If the entered PIN is not
correct, the User is given
another 4 tries before the
board gets blocked-up by
its security interlock.
Before being blocked, the
system can be started
again by switching it off
and on again.
To use this sub-menu it
is necessary to enter
the PIN code:
use first the “ + ” and “ - “
keys to set each figure,
then confirm it by OK.
As every single figure
gets confirmed, an
asterisk takes its place,
so preserving secrecy.
………