Albemarle 288 EXPRESS FISHERMAN Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 122

Albemarle 288 EXPRESS FISHERMAN Скачать руководство пользователя страница 41

41

288 OBXF

Chapter 5:

FRESH WATER SYSTEM

5.1 General

The fresh water system consists of a potable water tank,

distribution lines and a distribution pump. The pump is

equipped with an automatic pressure switch and is located

in the port stern bilge below the cockpit. The tank is filled

through a labeled deck plate located on the port gunnel.

DO  NOT  FILL  SYSTEM WITH  ANYTHING  OTHER
THAN WATER.    SHOULD THE  SYSTEM  BECOME
CONTAMINATED WITH  FUEL  OR  OTHER TOXIC
FLUIDS,    COMPONENT  REPLACEMENT  MAY  BE
NECESSARY.

DO NOT CONFUSE THE FUEL FILL DECK PLATE
WITH THE WATER  FILL  OR WASTE  PUMP  OUT
DECK  PLATES.   THESE  PLATES  ALSO  ARE
LABELED  ACCORDINGLY.    IF  GASOLINE  OR
DIESEL  FUEL  IS  ACCIDENTALLY  PUMPED  INTO
THE WATER OR WASTE TANK,  DO NOT ATTEMPT
TO PUMP IT OUT YOURSELF.  WATER AND WASTE
PUMPS ARE NOT DESIGNED TO PUMP FUEL AND
A FIRE OR EXPLOSION COULD RESULT.  CONTACT
YOUR DEALER OR THE ALBEMARLE CUSTOMER
SERVICE  DEPARTMENT  FOR  ASSISTANCE  IN
HAVING THE FUEL PROFESSIONALLY REMOVED
AND  COMPONENTS  OF THE  FRESH  WATER
SYSTEM REPLACED AS NECESSARY.

5.2 Fresh Water System Operation

Fill the water supply tank slowly through the labeled deck

plate. After filling the water tank, partially open all faucets.

The Water Pressure breaker on the cabin DC panel should be

on. Allow the pump to run until all of the air is purged from

the system and a steady stream of water is flowing from each

outlet. Next, turn off the faucets one by one. As the pressure

builds, the pump will automatically shut off.

When properly primed and activated the water system will

operate much like the water system in a home. An automatic

pressure sensor keeps the system pressurized. If the system

has been recently filled or has not been used for an extended

period, air bubbles may accumulate at the pump and the

system may have to be reprimed.

Whenever the boat is left unattended, the Water Pressure

breaker should be placed in the “OFF” position.

The Washdown Hose Connector

The fresh water wash down hose connection is located on

the port side of the cockpit and uses a standard garden hose

connection. Make sure the wash down faucet valve or the hose

spray nozzle is off when the fresh water system is activated.

Fresh Water Pump and Strainer in Port Stern Bilge

Fresh Water Washdown Hose Connector

«
...
39
40
41
42
43
...
»

Содержание 288 EXPRESS FISHERMAN



























































































































Отзывы:

Нет отзывов