PX845PE/GE Series
41
CPU Clock Ratio
Before you configure this option, please make sure that your CPU ratio can be adjusted.
This item displays the CPU ratio information detected by the system.
Options: 8x - 50X
Spread Spectrum
The Spread Spectrum function can reduce the EMI (Electromagnetic Interference) generated.
Options: Enabled (default)
、
Disabled
CPU Host Frequency (MHz)
This item displays the CPU Host Clock. You can set it from 100 to 248. The default
depends on your CPU frequency. If you over-clock the following 2 items can be adjusted.
Default: By CPU speed
Fixed AGP/PCI Output Freq
This item allows you to fix the AGP/PCI output frequency at 66MHz/33MHz. You may
need to adjust this value when over-clocking is unsuccessful.
Options: Disabled (default)
、
66MHz/33MHz
CPU:AGP Clock Ratio
This item allows you to adjust your CPU:AGP clock ratio. The result displays as the
AGP/PCI frequency. Options: Auto (default)
、
1.5X
、
2.0X
、
2.5X
DDR:CPU Ratio
This item allows you to adjust your DRAM: CPU Clock Ratio. This option allows you to
over-clock the system.
When CPU host frequency is set to 100 Options: Auto (default)
、
1.50X (Debug Mode)
、
2.50X
、
2.66X
When CPU host frequency is set to 133 Options: Auto (default)
、
2.00X
、
2.50X
、
2.66X
(Turbo Mode)
AGP Voltage (Volt)
This item allows you to adjust the AGP Voltage. Options: 1.5 (default)
、
1.6
DDR Voltage (Volt)
This item allows you to adjust the RAM voltage. Options: 2.5 (default)
、
2.6
、
2.7
、
2.8
