PX845PE/GE Series
38
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to
attempt to predict the possible failure of storage drives. Options: Disabled (default)
、
Enabled
Small LOGO (EPA) Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled (default)
、
Enabled
Advanced Chipset Features
DRAM Timing Selectable
This item determines DRAM clock/ timing using SPD or manual configuration.
Make sure your memory module has SPD (Serial Presence Data), if you want to select the
<By SPD> option. Options: Manual, By SPD (default)
CAS Latency Time
This item determines CAS Latency. When synchronous DRAM is installed, the number of
clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from the
default value specified by the system designer. Options: 1.5
、
2
、
2.5
、
3 and By SPD (default)
Active to Precharge Delay
This item allows you to select DRAM Active to Precharge Delay.
Options: 7
、
6
、
5 and By SPD (default)
DRAM RAS# to CAS# Delay
This item allows you to select a delay time between the CAS and RAS strobe signals. It
only applies when DRAM is written to, read from, or refreshed.
Options: 3
、
2 and default is by SPD
DRAM RAS# Precharge
This item allows you to select the DRAM RAS# precharge time. The ROW address strobe
must precharge again before DRAM is refreshed. An inadequate configuration may result in
incomplete data. Options: 3
、
2 and By SPD (default)
Refresh Mode Select
Select the refresh mode.
Options: 15.6 us
、
7.8 us
、
64 us
、
Auto (default)
System BIOS Cacheable
When enabled, accesses to system BIOS ROM addressed at F0000H-FFFFFH are cached,
provided that the cache controller is enabled. Options: Enabled (default), Disabled
