PX845PE/GE Series
47
3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, each of the ranges are from 1 min. to 1 hr. except for HDD
Power Down, which ranges from 1 min. to 15 min. and includes a “disable” option.
Note: If you select Min. or Max. Power Saving modes, the “HDD Power Down” value and
the “Suspend Mode” value are both fixed.
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen (default)
This option only writes blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Video Off In Suspend
This determines whether power to the monitor is switched off when the computer is in
suspend mode. Options: Yes
、
No (default)
Suspend Type
This item allows you to select the suspend type under the ACPI operating system.
Options: Stop Grant (default)
、
PwrOn Suspend
Modem Use IRQ
This determines the modem’s IRQ. Options: 3 (default)
、
4
、
5
、
7
、
9
、
10
、
11
、
NA.
Suspend Mode
This item allows you to select the suspend time under the ACPI operating system.
Options: Disabled(default)
、
1Min
、
2Min
、
4Min
、
6Min
、
8Min
、
10Min
、
20Min
、
30Min
、
40Min
、
1Hour
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable period of
system inactivity. All other devices remain active.
Options: Disabled (default)
、
1 Min
、
2 Min
、
3 Min
、
4 Min
、
5 Min
、
6 Min
、
7 Min
、
8 Min
、
9 Min
、
10 Min
、
11 Min
、
12 Min
、
13 Min
、
14 Min
、
15Min
Soft-Off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system has “hung.”
Options: Delay 4 Sec, Instant-Off (default).
