Albasca MK-5800, Руководство по настройке, Страница: 15 / 128

Enter Setup
** Exit Setup 4
Level Trigger/Pulse Trigger
Level trigger: Decode session is activated and continued by constant active trigger signal. The decode
session ends once the barcode is decoded or decode session timeout expires.
Pulse trigger: Decode session is activated by electric pulse of trigger signal. The decode session
continues until the barcode is decoded or decode session timeout expires.
Auto Sleep
Auto Sleep allows the scanner in the Trigger Mode to automatically enter the sleep or low power mode if
no operation or communication is performed for a time period (user programmable). When the scanner is
in the sleep mode, receiving trigger signal can awake the scanner. The scanner returns to full operation
within 100ms.
The parameter below specifies how long the scanner remains idle (no operation or communication occurs)
before it is put into sleep mode. It is programmable in 1ms increments from 0ms to 65,535ms. The default
setting is 500ms. To learn how to program this parameter, see Appendix 4 .
** Level Trigger Pulse Trigger
** Enable Auto Sleep Disable Auto Sleep
Time Period from Idle to Sleep