ALBA | HD Ready LCD TV | Instruction Manual | Helpline: 0845 604 0105
7
2. Connect the antenna cable or CATV cable
to the aerial socket
TV ANTENNA
at
the back of the TV set.
3.
Remote control:
Remove the cover of the battery
compartment. Insert the 2 batteries
supplied (Type AAA 1.5V).
4.
Power:
Insert the power cord in the wall socket
with AC power supply. You can see LED
states at the front panel. If the LED colour
is Blue, means the TV set is power on. If
the LED colour is Red, which means this
TV set is in standby state.
5. Turn the TV on:
Press the POWER key on the Remote
control or the side panel control knobs.
The TV will be turned on in a minute with
display on the screen.
Vol
AD
Power Key
For 42" model
NOTE
Wall mount bracket & screws are not
included.
Please make sure to connect the power plug
to the wall outlet socket after connecting the
TV to the power cord!
1. Install the base stand; place the TV on a
solid surface.
Min
1 m
Ensure that the TV is placed in a position
to allow free flow of air. Do not cover the
ventilation openings on the back cover.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles,
should be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure
to rain or water. The equipment shall not
be exposed to dripping or splashing.
