Advanced Operation (DVD)
Audio CD
Insert the disc and it will start playing as soon as the
disc contents have been read. The disc will start
playing track one.
There is no display for this function.
•
PROGRAM:
Use the Program button to select the
tracks in the order of preference, enter the
numbers into the OSD boxes, then use the▼ to
select
Start
and press
OK
.
•
PREV/NEXT:
Use these buttons to jump forward
or back quickly.
•
PLAY/PAUSE:
Starts playback and pause.
•
STOP:
Stops playback and returns to the DVD
splash screen.
NOTE
:
There will be a delay of 3 seconds to start
play after the stop button has been pressed, this is
due to the disc stopping rotation and restarting.
VCD/SVCD (Video CD and Super Video CD)
Insert the disc and it will start playing as soon as the
disc contents have been read. The disc will start
playing track one.
NOTE: There are no rules for
VCD/SVCD. These are generally home-authored
and the data on the disc can vary greatly.
•
PREV/NEXT:
Use these buttons to jump forward
or back quickly.
•
PLAY/PAUSE:
Starts playback and pause.
•
STOP:
Stops playback and returns to the DVD
Splash screen.
NOTE
:
There will be a delay of 3 seconds to start
play after the Stop button has been pressed, this is
due to the disc stopping rotation and its restart.
DVD Setup
To set the DVD section to your requirements a
series of menus are provided. With no disc in the
player, press the
SETUP
button on the remote
control, you will now see menu (Fig 41).
General Setup Page
Use the ▲▼ buttons to select the item required and
use the ► button to select the sub menu. In the
sub-menu use the ▲▼ buttons to select the item
required and
OK
to confirm
.
Fig 41
TV Display:
Some DVD discs have been authored
in 4:3 aspect ratio format. To see the material in its
original mode, you may need to change the aspect
ratio.
•
Normal/ PS (Pan& Scan).
Black edges left and
right will be seen.
•
Normal / LB (Letterbox).
Top and bottom of the
screen may be black.
•
Wide 16:9 (Widescreen).
Full width picture but
may have black areas top and bottom.
OSD Lang:
Select the OSD Language (English is
default)
Screen Saver:
Should you pause the DVD or CD
for more than a few minutes the screen will revert to
a blank screen with a moving DVD message. As
soon as you press any function button the screen
will revert to normal. Select
Off
if you do not require
this feature.
Last Memory
ON/OFF:
You may wish the player to
remember where it finished playing a disc and then
remove the disc. When you stop the disc, the player
will automatically remember the point it finished
playing. When the disc is reinserted the player will
continue from the same point.
NOTE: If you put in a different disc the memory will
be cleared from the previous disc.
24
For any help concerning setup and use of your TV please call the
Customer Help Line: 0845 604 0105
