Alaxala AX1240S Series, Руководство пользователя

Страница: 32 / 37

AX1240S-AP-0202C_R2X
32
2.3.9 Event location = DHCPSN [Addition]
The following message has been added to No. 15 in Table 2-24 Switch INFO information when the event location is
DHCPSN .
Table 2-24 Switch INFO information when the event location is DHCPSN
Event
level
Event
location
Ref. Code Message text No.
Description
INFO DHCPSN DHCP server packets were received at an untrust
port(
<IF_number>
/
<VLAN-ID>
/
<MAC_address>
/
<IP_address>
).
15
An invalid DHCP server was detected. This message is output once every 5 minutes on a port-by-port basis.
<IF_number> : Type and number of the interface that received the DHCP packets
・
<IF#> : Interface port number
・
ChGr: <channel-group#> : Channel group number
<VLAN ID>
/
<MAC_address>
/
<IP_address> : DHCP server information
<VLAN ID> : VLAN ID
<MAC_address> : MAC address
<IP_address> : IP address
[Action]
Check the connected device.
2.5 Port
2.5.3 Event location = FABRIC [Addition]
The following message has been added to No. 6 in Table 2-55 Switch CRITC information when the event location is
FABRIC .
Table 2-55 Switch CRITC information when the event location is FABRIC
Event
level
Event
location
Ref. Code Message text No.
Description
CRITC FABRIC 1d290000
Failed to set STG
<STG#>
(rv=
<xx>
)
6
Configuration for the hardware failed.
<STG#> : Used for analysis by the manufacturer
<xx> : Used for analysis by the manufacturer
[Action]
Restart the Switch by executing the
reload
operation command, or by turning it off and then on.