AX1240S-AP-0202C_R2X
20
After the change:
Table 10-2 Operating conditions of MAC-based authentication
Category Configuring
ports
Specifiable
VLAN type
Frame
type
Fixed VLAN
Dynamic
VLAN
Legacy
Port type Access port
native
Port VLAN
MAC VLAN
Untagged Y
N N
Trunk
port
native
Port
VLAN
Untagged Y
N
N
allowed
Port
VLAN
MAC VLAN
Tagged Y
N
N
Protocol
port
-- --
-- N
N
N
MAC
port
native
Port
VLAN
Untagged
Y
#
N
N
mac
MAC
VLAN
Untagged N
Y
Y
dot1q
Port
VLAN
MAC VLAN
Tagged Y
N
N
Default VLAN
Y
N
N
fastethernet
Y
Y
Y
Interface
type
gigabitethernet
Y
Y
Y
port channel
N
N
N
Legend
Y: Operable
N: Not operable
--: Not applicable for authentication ports
#
For more details, see
5.4.4 Auto authentication mode accommodation at the same MAC port
.
10.3 Dynamic VLAN mode
10.3.2 Authentication functionality
(8) Roaming (moving authenticated terminals between ports)
[Change]
The roaming operating conditions have been corrected as follows:
Before the change:
Roaming is possible when all of the following conditions are met:
・
The
mac-authentication roaming
configuration command is set.
・
The ports before and after the move are dynamic VLAN mode ports.
・
The post-authentication VLAN before the move is defined for the port after the move by using the
switchport mac vlan
configuration command.
After the change:
Roaming is possible when all of the following conditions are met:
・
The
mac-authentication roaming
configuration command is set.
・
The ports before and after the move are dynamic VLAN mode ports.
