AX1240S-AP-0202C_R2X
5
1. Changes in Configuration Guide Vol. 1 (For Version
2.2) (AX1240S-S001-30X)
3. Switch Capacities
3.2 Switch Capacities
(13) Layer 2 authentication functionality [Change]
The filter conditions that can be specified for the IPv4 access list used for authentication in Table
3-24 Other capacity
limitations regarding Layer 2 authentication – common functionality
have been corrected as follows. [Ver. 2.2.E and
later]
Before the change:
Table 3-24 Other capacity limitations regarding Layer 2 authentication-common functionality
Item Maximum
number
Registered general-purpose RADIUS servers
20
#1
Access list names that can be specified in an authentication-only IPv4 access list
1
Filter conditions that can be specified in an authentication-only IPv4 access list
20
#2
Unauthenticated terminals that can be registered
256
#3
#1
This is the number of registered general-purpose RADIUS servers in the whole Switch, including login
security functionality.
#2
If you set a number of filter entries that exceeds the Switch capacity, only the entries within the capacity
limitations are applied.
#3
When the number of unauthenticated terminals exceeds the maximum number, delete those with older update
periods and register newly unauthenticated terminals.
After the change:
Table 3-24 Other capacity limitations regarding Layer 2 authentication-common functionality
Item Maximum
number
Registered general-purpose RADIUS servers
20
#1
Access list names that can be specified in an authentication-only IPv4 access list
1
Filter conditions that can be specified in an authentication-only IPv4 access list
250
#2
Unauthenticated terminals that can be registered
256
#3
#1
This is the number of registered general-purpose RADIUS servers in the whole Switch, including login
security functionality.
#2
If you set a number of filter entries that exceeds the Switch capacity, only the entries within the capacity
limitations are applied.
#3
When the number of unauthenticated terminals exceeds the maximum number, delete those with older update
periods and register newly unauthenticated terminals.
