AX1240S-AP-0202C_R2X
17
After the change:
Table 8-2 Operating conditions for Web authentication
Type Configuring
ports
Specifiable
VLAN type
Frame type
Fixed VLAN
Dynamic VLAN
Legacy
Port type Access port
native
Port VLAN
MAC VLAN
Untagged Y
N
N
Trunk
port native Port
VLAN
Untagged Y
N
N
allowed
Port
VLAN
MAC VLAN
Tagged Y
N
N
Protocol
port --
--
--
N
N
N
MAC
native Port
VLAN
Untagged
Y
#
N N
Port
mac MAC
VLAN
Untagged N
Y
Y
dot1q Port
VLAN
MAC VLAN
Tagged Y
N
N
Default VLAN
Y
N
N
fastethernet
Y
Y
Y
Interface
type
gigabitethernet
Y
Y
Y
port
channel
N
N
Y
Legend
Y: Available
N: Not available
--: Not applicable for authentication ports
#
For more details, see
5.4.4 Auto authentication mode accommodation at the same MAC port
.
8.3 Dynamic VLAN mode
8.3.2 Authentication functionality [Change]
(7) Roaming (moving authenticated terminals between ports)
[Change]
The roaming operating conditions have been corrected as follows:
Before the change:
Roaming is enabled when any of the following conditions is met:
The
web-authentication roaming
configuration command is configured.
Ports between which a terminal is moved are in fixed VLAN mode.
The post-authentication VLAN of the port before being switched is configured in the
switchport mac vlan
configuration command for the Switch destination port.
After the change:
Roaming is enabled when any of the following conditions is met:
The
web-authentication roaming
configuration command is configured.
Ports between which a terminal is moved are in fixed VLAN mode.
