ALAVs Transitional Species Blubber Bot, Руководство пользователя

Страница: 18 / 23

16
9
.
Your assembly should now look like this.
10
.
(A) Place the PCB front side up. (B) Grab the opposite ends of the top carriage part and bend them towards each other, pinching the motor mount
holes together. If the motor holes are obstructed, gently push out the excess plastic.
11
.
Gently insert the motor through both
holes. The motor leads should be facing right.
NOTE: THE CARRIAGE IS FRAGILE AND YOU SHOULD
EASE THE MOTOR THROUGH THE MOTOR MOUNT
HOLE CAREFULLY IN ORDER TO PREVENT THE CAR-
RIAGE FROM BREAKING. BE CAUTIOUS NOT TO PUT
TOO MUCH PRESSURE ON THE LEADS OF THE MOTOR
WHILE INSERTING IT INTO PLACE.
12
.
Your assembly should look like the picture above. Make sure that the
leads are to the right when looking at the front of the PCB.