ALAVs Transitional Species Blubber Bot, Руководство пользователя

Страница: 14 / 23

12
4
.
Submerge the shrink tube in the hot glue
until is seems to be glued in place covering
the LED.
5
.
(A) Bend the leads of the photocell at a
90º angle. (B) Solder a two pin header to the
end of the leads.
_
2.7
FEELER
1
.
Holding the piano wire with pliers, push
the pom pom through the center onto the
piano wire.
2
.
Using pliers, bend the wire into a hook.
3
.
Pull the pom pom up to the hook, making
sure it doesn’t come off easily.
4
.
Using heavy duty cutters, cut paperclip in
the exact location as pictured above.
5
.
Bend the hook end so it’s 90º in relation to
the other end.
6
.
Grip the hooked end with pliers and bend
it a little clockwise.