1.Place the fixing pad under the fixer and attach both to the bike frame.
2.Tie the fixer with straps.
3.Place the Cycling Computer in the fixer 45 degree to the frame as shown in the
diagram.
4.Turn the Cycling Computer clockwise until it clicks into the 12-oclock position.
2
3
4
1
HR-SET
129~144
HARD
152~171
TARGET
DIST
1.In standby mode, Press
to point to
TRAINING
PROG.
, Press
to enter.
2.Press
to switch between training programs.
3.When pointed to training target area for manual
setup (e.g. the green labeled area), Press
to
point to flashing setup item, Press
to change
settings. (See crossreference in page 18)
4.After setup, Press
to start bicycling.
5.Press
to view instant information during bicycling.
(See crossreference in page 19)
6.Stop bicycling, Press to end,
Select
Exit
, press
YES/NO
,
to confirm, Press again
to view
results of current bicycling, Press to exit,
Select
Save
, press
YES/NO
,
to confirm, the system
returns to standby mode after bicycling data is saved.
TRAINING
PROG.
- - - - - - - -
TARGET
CALORIE
TARGET
TIME
MOD.
133~152
LIGHT
114~133
Switch between training programs
Instant bicycling screen
Distance
Calories
Exercise Timing
Change to see other information
Accessories included with your product:
Installation method:
Fixing pad
Ties
CR2032 button battery
(pre-installed in your
product)
Fixer
16
Bluetooth Cycling Computer
17
User Manual
4
5
Install the Cycling Computer
Exercise Mode
