![alatech Cyclaid 10 Скачать руководство пользователя страница 16](http://html1.mh-extra.com/html/alatech/cyclaid-10/cyclaid-10_user-manual_2889021016.webp)
Health Warnings
•Consult your doctor before starting or changing your exercise program.
Battery Low Indicator
The battery low indicator prompts once the battery power
is down to a certain level; the following functions may be
affected or limited:
•Bluetooth connection lost and link with sensor or
mobile device failed.
•Backlight failed to turn on.
In case the power low indicator persists displaying, get the battery
replaced immediately.
Replace Battery
1.Use a coin to twist it counter-clockwise to
.
2.Remove the cover and insert (replace) the battery
(type: CR2032) into the sensor with positive (+)
side facing up.
3.Place the battery cover ( points to
). Use a coin
to twist the cover clockwise to close ( points to ).
Precautions on the Use of Battery
Button battery in your Cycling Computer may suffer shortened life cycle or cause
damage to the core, fire, chemical burns, electrolyte leakage, and/or personal injury.
•DO NOT expose your device to a heat source or high temperatures.
•DO NOT burn or drill your device or its battery.
•Please store your device in environment with a temperature range from
10°C to 60°C (50°F to 140°F) if it is not to be used for long time.
•DO NOT use your device in environment with temperatures exceeding
10°C to 60°C (50°F to 140°F).
•Please check local regulations for disposal of your device / battery or contact
local waste disposal agencies.
Warnings on replaceable batteries:
•DO NOT remove batteries with pointed object.
•Keep batteries out of children's reach.
•DO NOT disassemble, drill, or damage batteries.
•Please replace batteries with correct ones. Fail to do so may lead to fire or
explosion.
•Replaced button battery may contain perchlorate substance and require
special disposal. Warnings on non-replacement battery: DO NOT try to remove
nonreplacement battery.
FCC Declaration of Conformity
This device complies with Part 15, FCC Code. Operation of this device is subject to
the following two conditions:
1.Devices may not cause interference.
2.Must accept interference from other sources, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Please check local waste disposal
regulations to dispose your
wasted battery.
•Do the basic setups described in page 12-15 after every battery replacement. If you have done
the Cycling Computer user setup with the ALA COACH+ App, you may re-sync settings to your
Cycling Computer as desicribed in "Phone sync." on page 26-27.
COIN
•
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
30
Cyclaid 10
Bluetooth Cycling Computer
31
User Manual
A
Appendix
A
Appendix