PAIRING
BIKE
PAIRING
HRM
•Make sure
HRM
is set to
ON
in the Sensor Setup window. (Page 15)
•Keep your heart rate sensor and Cycling Computer within 10cm from each other. Keep both
away from other Bluetooth devices to prevent incorrect pairing.
•Make sure
SPD/CAD
is set to
ON
in the Sensor Setup window. (Page 15)
•Activate your Speed and Cadence Sensor before pairing by cranking to start the sensor and
establish connection. Your Speed and Cadence Sensor remains awake for one minute. It goes
back to sleep mode again if no Bluetooth connection is enabled.
•Keep your Speed and Cadence Sensor and Cycling Computer close to each other and away
from other Bluetooth devices for correct pairing.
1.In standby mode, Press
to point to
PAIRING SET
, Press
to enter.
2.Press
to point to
PAIRING BIKE
, Press
to create Bluetooth connection and
start pairing.
3.Paired successfully, message
OK
prompts, Press to exit.
Pairing failed, message
NO-DEV
prompts, Press to exit to
PAIRING BIKE
and
starts from STEP 2 again.
1.In standby mode, Press
to point to
PAIRING SET
, Press
to enter.
2.In the
PAIRING HRM
window, Press
to create Bluetooth connection and start
pairing.
3.Paired successfully, message
OK
prompts, Press to exit.
Pairing failed, message
NO-DEV
prompts, Press to exit to
PAIRING HRM
and
starts from STEP 2 again.
PAIRING
HRM
PAIRING
HRM
PAIRING
HRM
OK
PAIRING
HRM
NO-DEV
Please refer to the Speed and Cadence Sensor manual
to install the sensor and its included magnet to your
bike, turn the crank counterclockwise until the sensor
is connected to the Cycling Computer and the "
OK
"
message prompts.
PAIRING
BIKE
OK
PAIRING
BIKE
NO-DEV
PAIRING
BIKE
PAIRING
SENSOR
- - - - - - - -
PAIRING
SENSOR
- - - - - - - -
Pair your HRM
Pair your Speed and
Cadence Sensor
Please refer to the Heart Rate Strap manual on
wearing it properly, or press and hold the metal
button at the back of the heart rate sensor (HRM) with
both hands until the "
OK
" message prompts in your
Cycling Computer.
10
Bluetooth Cycling Computer
11
User Manual
2
2
Pairing with Sensor
2-1 Pair with Your HRM
2-2 Pair with Your Speed and Cadence Sensor
Pairing with Sensor
