ALAT UJI OM-2041 Скачать руководство пользователя страница 14

Страница: 14 / 55

◆

Sensor with thermocouple connector

[Connection with the sensor]

Switch off this unit.

Open the connector cover of a channel to insert the sensor.

Put the sensor connector in the sensor port while referring to the polarity (see the Fig.) marked on

the connector port of this unit.

Insert the connector firmly until it is in contact with the far side.

CAUTION

•

Check the connector orientation carefully.

If the connector is inserted forcibly in the incorrect direction, the unit and/or sensor may be
damaged and may malfunction.

•

Connect or disconnect with the sensor carefully enough not to break any sensor lead.

Otherwise, wiring trouble may occur and the unit may malfunction.

[Disconnection with the sensor]

Switch off this unit.

Hold the sensor connector and pull it out straight.

CAUTION

•

A general thermocouple connector on the market is available for the unit.

However, note that the thermocouple connector different from the specified sensor is not applicable
to the drip-proof structure.

•

Do not hold the lead wire and pull it out when disconnecting the sensor.

Otherwise, wiring trouble may occur.

•

Close always the connector covers of the channels not in use. Otherwise, the drip-proof

performance may not to be maintained and the unit may malfunction.

Sensor port

Connector cover

Wide (

−

)

Narrow (

)

Miniature connector

Содержание OM-2041
























































Результаты поиска

Содержание OM-2041

Отзывы:

Похожие инструкции для OM-2041

Бренды по названию

Популярные бренды

ALAT UJI OM-2041, Инструкция по эксплуатации

Результаты поиска

Содержание OM-2041

Отзывы:

Похожие инструкции для OM-2041

Бренды по названию

Популярные бренды