8
Default User Numbers for PL3500 / ETPL
USER TYPE
ASSIGNED TO
USER NUMBER:
(Not Used--The PL3500/ETPL does not contain a Master Number)
1
Basic User Cards (Accessible through DL-Windows only) with no Entry
Delay
2 - 11
Quick Enable User 300 (Function Card #8)
297
Quick PC Communications Card (Function Card #1)
298
AL-DTM Data Transfer Card (Function Card #2)
299
One-Time-Only Service Card (Function Card #9)
300
Basic User Cards
301-2000
Basic User Cards (Accessible through DL-Windows only)
12 - 296
•
Users 2-296 can only be accessed through DL-Windows.
•
User 298 is the only code that will initiate PC communications (with DL-Windows).
•
User 299 is a Non-Pass Code (does not unlock the PL3500/ETPL). This is the only code that will initiate data transfer
with the AL-DTM.
NOTES:
Default User Numbers
The table below displays a graphical representation of how
the internal memory of the PL3500 /ETPL lock is organized.
The default settings are the original settings that were set at
the factory (the lock's original factory condition when the lock
was first taken out of its box). The default settings are per-
manently encoded within the lock's fixed memory, and when
the lock is first started, or when power is removed and re-
applied (see Wiring and Power-Up, page 11), the original
factory default settings are re-loaded and take effect.
For more information, see the explanations for User Num-
bers in the
Terminology Used in this Manual
section on
pages 6-7.
