manualshive.com logo in svg

Alarm Lock Eagle 8000 Series, Руководство по эксплуатации

Поделиться
Скачать
Alarm Lock Eagle 8000 Series Скачать руководство пользователя страница 12

The following information is applicable only where local ordinance permits use of your alarm 

 

control panel for fire detection.

Controlling Your Fire Circuit

If your alarm specialist installed smoke detectors or heat sensing thermostats, you have 24-hour
fire protection. Your control panel will constantly monitor this zone for any alarm or trouble
condition.

Fire-Zone Alarm

An alarm on the Fire Zone will cause the bottom red light to come on and the sounder to pulse.
The fire alarm will sound, overriding any other alarm.

Fire-Zone Trouble

If there is trouble on the fire circuit, the bottom red AUX / FIRE /TROUBLE light will flash
and the sounder will pulse after a l0-second delay. To silence the sounder, press Key [9]. The
light will continue to flash to indicate the trouble. After the trouble is repaired, press Key [9]
again to turn off the light.

Resetting After An Alarm

The fire alarm may be reset by arming, and then disarming; or (if so programmed) by waiting for
it to automatically shut off. The sounder and the AUX / FIRE / TROUBLE light will stay on.
Press Key [9] to silence the sounder. The red AUX  / FIRE  / TROUBLE light should go off in
about 30 seconds. If smoke has not cleared from a smoke detector, or a thermostat has not
cooled, the red AUX / FIRE  / TROUBLE light will remain on. Press Key [9] every 30 seconds

 

until the condition has cleared and the light goes off.

NOTE: 

If the sounder is on due to a fire or fire-trouble condition, you will not be able to arm the

burglar alarm until you silence the sounder by holding down Key [9] until the beep sounds.

Would You Like More Safety Information?

For information on home fire detection, burn safety, and home fire safety, contact the National
Fire Protection Association, Public Affairs Dept. 054, Batterymarch Plaza, Quincy, MA 02269.

12

    

Содержание Eagle 8000 Series













Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды