32
Stop Scanning - leave paper in path
: scanning will stop immediately
(i.e., making no attempt to clear the paper path) and control will return
to the scanning application (i.e., ends the job). Image(s) of the multi-
fed document will not be generated. Clear any documents from the
paper path prior to restarting the scan session from the scanning
application.
Interactive Multifeed Recovery
: scanning will stop but the scanning
application will be waiting for additional images (i.e. stops the feeder).
Images of the multi-fed document will be displayed on your computer.
You can accept these images or rescan to replace them. You can
make your selection on your computer or the scanner. Send the
images to your application and resume scanning by selecting
Accept
.
Selecting
Rescan
will discard the images and scanning will resume.
Scanning may be stopped by selecting
Stop
.
Put the multifed document(s) into the input tray before selecting
Rescan
.
Speaker icon
— displays the Open dialog box allowing you to select the
desired tone (.wav file) for your alarm.
Ultrasonic Detection
— check this option to set multifeed detection.
Sensitivity — controls how aggressively the scanner will work to determine
if more than one document is fed into the transport. Multifeeds are
triggered by detecting air gaps between documents. This allows multifeed
detection to be used with job sets containing documents with mixed
thicknesses.
None
Low
: the least aggressive setting and is less likely to detect labels,
poor quality, thick or wrinkled documents as multifed documents.
Medium
: use Medium sensitivity if your application has varying
document thickness or labels attached to the document. Depending on
the label material, most documents with labels should not be detected
as a multifed document.
High
: the most aggressive setting. This is a good setting to use if all
documents are similar in thickness to 75.2 g/m2 (20 lb.) Bond paper.
Log tab
The Log tab provides a listing of any errors that have been encountered.
