Alamo Schwarze SUPERVA C SUPER UPDRAFT, Руководство по эксплуатации продукта

Страница: 69 / 79

Section 4 - Service
70
SCHWARZE SUPER UPDRAFT
revised 04/19
MAINTENANCE
14. DUST SUPPRESSION SYSTEM MAINTENANCE
The standard water system consists of a gravity-feed water line to the sweeping head and a flowjet water pump
for the hopper, gutter broom spray nozzle dust suppression. The water line for the head needs little in the way
of maintenance except the occasional check beneath the sweeping head to be sure that its outlet has not
become clogged. However, the water strainer should be cleaned daily and the water nozzles checked for
operation and cleaned as needed. When freezing temperatures are expected, the water reservoir should be
drained or an environmentally safe anti-freeze added to the water per the anti-freeze manufacturer’s
instructions.
14.1 Water Filter Cleaning
The plastic strainer, located beneath the left water reservoir, is positioned in-line between the water reservoir
and the water pump. Its purpose is to remove particles from the water that might cause failure of the spray tips
of the dust suppression system. The cap spins off for easy daily flushing of these trapped particles. Generally
speaking, once a week, the reservoir should be drained, the bottom of the strainer unscrewed, and the
cylindrical screen within the strainer removed and cleaned. Of course, the frequency of the need to clean this
screen will vary depending upon the purity of the water from the fill source.
Cleaning:
1. Drain the reservoir.
2. Unscrew the bottom of the strainer. Remove
and clean its screen.
3. Reassemble the strainer.
14.2 Water Nozzle Cleaning/Replacement
A dust suppression system nozzle needs cleaning when it is clogged and water flow is restricted.
Due to dusty conditions encountered during sweeping operations, dirt and debris particles entering the dust
suppression system are sometimes small enough to pass through the ‘Y’ strainer. These particles can build up
within a nozzle’s openings, restricting water flow. When this occurs, the nozzle must be cleaned or replaced.
Y STRAINER DISASSEMBLY
4.14 Dust Suppression System Maintenance
Water Filter Cleaning
Water Nozzle Cleaning/Replacment